MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New

MINI-CAB-w-Vinyl-Windshield-JOHN-DEERE-GATOR-HPX-XUV-2015-21-UTV-New-01-cn
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New

MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. (Vinyl Windshield, Soft TOP, Soft REAR Panel). 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2-3 Seats Side by Side UTV’s. For older model years, please refer too our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. These model years have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. 2 Soft TOP or Cap. 3 Soft REAR PANEL with Vinyl Window. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up. (National Guard Woodland is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Our JOHN DEERE GATOR XUV or HPX Mini Cab combines the Vinyl WINDSHEILD, the Soft TOP, and the REAR PANEL with a Vinyl WINDOW all into an economical package! The Mini Cab Enclosure uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The windshield and rear window are made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multi-filament polyester yarns. Along with the highest quality materials, all Enclosures are hand measured and handcrafted to ensure a precise fit. The Mini Cab provides shelter from rain, wind, sun, and snow. The Summer Cab comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the Summer Cab package for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to order for you! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all model years shown above. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Photo 1-6: Shows different view of the Mini Cab on John Deere Gator. Photo 7-10: Shows examples of our high quality materials and workmanship. Photo 11-12: Show our standard colors available. Woodland camo no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Even though this package does not include a zipper or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. KK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT included in this package… Refer to other styles if desired. 30 gauge Aqua View Vinyl Windows- rear panel. All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Lexan Windshield NOT included in this package… Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT included in this package… Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Velcro rated from 0 to 120 degrees F. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank You for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If listing states. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Fits: HPX XUV (see description for model #)
  • Windshield: Yes – Vinyl
  • Mfg. Warranty: YES – One Year
  • Color: Black or Mossy Oak BreakUp
  • Top Included?: Yes
  • Doors Included?: NO
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camo’s (Corduva)
  • Manufacturer Part Number: USA-WTR JDGX15
  • Part Type: UTV Cover or Enclosure
  • Back Panel Included?: Yes
  • Vinyl Windows: Yes – In back panel
  • SATISFACTION GUARANTEED POLICY: 14 day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Mini Cab Enclousure includes:: Vinyl Windshield, Soft Top, + Rear Window(No Door)
  • Part Name: Mini Cab Enclosure w/ Vinyl Windshield
  • YEARS: 2015 – 2021
  • MODELS: HPX XUV (see description for model #)
  • Soft Cab System: MODULAR
  • Placement on Vehicle: Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

MINI CAB w Vinyl Windshield JOHN DEERE GATOR HPX XUV (2015-21) UTV New

FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21

FULL-CAB-Enclosure-for-Existing-Hard-WindshieldJohn-Deere-GATOR-HPX-XUV-2015-21-01-ucs
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21

FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. TOP + REAR WINDOW + DOORS =. 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2 Seat – UTV’s. For older model years, please refer too our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. These model years have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. 2 Rear Panel w/ vinyl window. 3 Both Doors w/ vinyl windows. Do you already have a Windshield on your unit? Do you want to fully enclosure your UTV? If yes, then this package is for you! This enclosure combined with your existing equipment (hard windshield) can create a Full Cab enclosure for your UTV. Proudly Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Doors Unzip & Roll back to be secured safely open with Velcro tabs and snaps included. The Full Cab Enclosure for your existing Windshield will fit the JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. This package DOES NOT include a WINDSHIELD. This package is for the individual who already has a hard windshield and wants to fully enclosure their UTV. The door & back windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. This enclosure is Made to order for you! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above and below (please verify availability for the new models added each year/season before ordering). Standard Colors: Black or Mossy Oak Break-Up. Ustom colors available by special order an addl. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Photo 1-4: Shows different views of the Top/Doors/Rear on a John Deere Gator. NOTE: Windshield shown in photo 2 is NOT INCLUDED. This listing assumes you already own a hard windshield. Photo 5-8: Shows high standard of materials and workmanship used on all enclosures. Photo 9: Standard colors available. NOTE: Woodland camo no longer available. Photo 10: Shows doors unzipped, rolled back and secured in an open position with velcro/snaps included. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. You can see the large industrial sized zippers and the clarity of view through the heavy Vinyl door & back windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. NOTE: The enclosure itself is made for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. Allows vinyl windows to open. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. Windshield NOT included in this package – you already have a wind shield. Velcro rates from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Fits: John Deere \
  • Windshield: No Windshield – you already own a hard windshield
  • Mfg. Warranty: One Year
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Top?: Yes, included
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
  • Manufacturer Part Number: USA-DE-FCF JDGX15
  • Part Type: UTV Cover or Enclosure
  • Rear Vinyl Window?: Yes
  • Doors w/ Vinyl Windows?: Yes
  • This Enclosure Style Includes:: Top / Rear / Doors (NO Windshield)
  • Part Name: Full Cab Enclosure for your Existing Hard W/S
  • Colors Available: Black or Mossy Oak BreakUp
  • Soft Cab Systle: MODULAR
  • YEARS: 2015-2021
  • Placement on Vehicle: Left, Right, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

FULL CAB Enclosure for Existing Hard WindshieldJohn Deere GATOR HPX XUV 2015-21

SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New

SOFT-BACK-Panel-w-Vinyl-Window-John-Deere-GATOR-XUV-835-865-2015-21-UTV-New-01-dx
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New

SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New
Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. XUV 835 + 865. 3 Seats / Side by Side UTV. These models have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. PROUDLY Hand Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up. (National Guard Woodland color no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). This Package includes a soft BACK Panel with a Vinyl Window for your John Deere GATOR HPX XUV UTV for an economical package. The Back Panel has a vinyl window. The enclosure are available in SOLID COLORS of Heavy Duty top gun marine canvas or in CAMO PATTERNS made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. Black IN-STOCK color but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. Now we have Mossy Oaks Break-Up available which is a 600 Deier 100% Polyester manufactured with a 2 pass Polyurethane Coating for Water Resistance. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the Soft BACK Panel Enclosure is hand measured and manufactured in the USA for superior fit and quality. We use marine sewing thread made from selected high tenacity, heat resistant, continuous multifilament polester yarns. The Soft Back Panel provides shelter from rain, wind, sun, and snow. It includes the adhesive Velcro as well as installation and care instructions. Everything is included in this Combo Package kit for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit models and years list above. Standard Colors: Black or. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Photo 1-4: Show the Rear Panel with Vinyl Window on a John Deere GATOR. Photo 5-9: Shows our premium quality materials and workmanship used in our enclosures. Photo 10: Show our standard enclosure colors available (Sorry, National Guard Woodland Camo no longer available). SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Some features are not used in this package, however, they are still discussed to give you a true feeling of the quality of workmanship and materials used in our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl door windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers for unmatched Crosswise Strength in the Industry & all YKK Zippers work in extreme temperatures down to 50 degrees below zero. (NOTE – Zippers NOT used in this package). 30 gauge Aqua View Vinyl Windows- rear window & doors. All Lexan Windshields use Quick Connect Clamps for easy removal and installation. (NOTE – Windshield NOT used in this package). Doors Unzip & Roll back to be secured safely with Velcro. (NOTE – Doors NOT used in this package). Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV roll bars or ROPS have been modified from the stock/standard mfg. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). You are responsible to ask any and all questions prior to ordering. Your order confirmation (as well as the listing description) states what is included and excluded. Exception – T his does not included if the product sent is defective or the wrong item. In this case a photo is required for verification. Please read the listing to determine if you ordered the correct item. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. Other than the name change, everything else is the same. Correction as of 04/01/2020 to. OUTSIDE CONTINENTAL USA, INTERNATIONAL SALES. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If listing states. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Fits: XUV 835 + 865
  • Windshield: No WS – You already have a WS
  • Mfg. Warranty: YES – One Year
  • Doors Included?: NO
  • TOP / Cap Included?: NO
  • Back Panel w Vinyl Window: YES
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camo’s (Corduva)
  • Manufacturer Part Number: USA-DE-BCK JDG835
  • Part Type: UTV Cover or Enclosure
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Standard Colors: Black or Mossy Oak BreakUp
  • Part Name: Soft BACK w/ Vinyl Window
  • YEARS fit Mid 400: 2018-2021
  • Soft Cab System:: MODULAR
  • Placement on Vehicle: Rear
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

SOFT BACK Panel w Vinyl Window John Deere GATOR XUV 835 865 (2015-21) UTV New