Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D

Full-set-4-Coil-over-Shock-Absorbers-Fit-John-Deere-Gator-XUV620i-Gator-XUV850D-01-spmc
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D

Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D
Full Set of 4 Coil-over Shock Absorbers. Front and Rear, Left and Right. Replaces OEM# AM137958 AM137957. Why a Complete Quick Replacment Strut? The “Why”: Safety and the ease of installation! These units come pre-loaded with the coil spring (where applicable), boot, bumper kit, spring seat, isolator and strut mount. There are no special tools required and they are vehicle specific as per application for a direct fit ready to install. Brand New Struts/Shocks from a Major Auto Parts Distributor in North America. Made to OE quality standards and performance. High corrosion resistance and long service life. Steel rod is mirco-polished with double chrome plate. Newer Valving technology operates in stages based on the velocity of the car. Use Teflon bonded piston seal to keep friction down and temperature cooler so that valving stays firmer. All-around welding on the spring seat. Piston seal is provided by an OE Supplier. For International or other US territories, additional charges apply. We will replace any parts supplied by us that in our opinion are proven defective. We are not responsible for items when subjected to abuse (off-road, competitions), commercial use, improper installation, accident, or normal wear. Must contact Axlestore for return authorization number. When to replace worn shocks or struts? There are four main reasons that determine when to replace them: 1 To upgrade performance; 2 to restore the vehicle’s designed performance (usually after 50,000 miles); 3 when the vehicle has excessive ride control conditions i. Nose dive, body roll, etc. ; or 4 when the vehicle has a failed unit i. Dripping hydraulic fluid, tire cupping, excessive bounce, etc. Testing has shown that original equipment gas-charged shocks and struts degrade measurably by 50,000 miles. Unlike a tire, which rotates a specific number of times per mile, a shock absorber or strut may compress and extend several times per mile on a smooth road, or several hundred times per mile on a very rough road. There are other factors that affect the life of a shock or strut, such as, regional weather conditions, amount and type of road contaminates, driving habits, loading of the vehicle, tire / wheel modifications, and the general mechanical condition of the suspension and tires. Why to replace worn shocks or struts? Performance degrades slowly over time. When shocks and struts aren’t controlling tire and body movement very well due to wear, all ride control conditions are affected. Stopping ability will be reduced. Tire performance is reduced and because of excessive movement, all other attached steering & suspension components are affected. We carry a wide range of shocks and struts. Every shocks and struts we carry is TS16949 certified. They are made to meet or exceed OEM quality. If you couldn’t find the item you need, please send us a message. Thank you for your business and we are happy to serve you as our valued customer! We strive to provide excellent customer service and satisfaction with our products. We look forward to the opportunity of resolving your concerns!
Full set 4 Coil-over Shock Absorbers Fit John Deere Gator XUV620i Gator XUV850D

Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R

Full-Set-4-Coil-Over-Shocks-John-Deere-Gator-XUV835E-835M-835R-865E-865M-865R-01-ozr
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R

Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R
Full Set of 4 Coil-Over Shock Absorbers. Front and Rear, Left and Right, Fit John Deere Gator. Replaces OEM# AM146539 AM146540 AM147682 AM147683. Why a Complete Quick Replacement Strut? The “Why”: Safety and the ease of installation! These units come pre-loaded with the coil spring (where applicable), boot, bumper kit, spring seat, isolator and strut mount. There are no special tools required and they are vehicle specific as per application for a direct fit ready to install. Brand New Struts/Shocks from a Major Auto Parts Distributor in North America. Made to OE quality standards and performance. High corrosion resistance and long service life. Steel rod is mirco-polished with double chrome plate. Newer Valving technology operates in stages based on the velocity of the car. Use Teflon bonded piston seal to keep friction down and temperature cooler so that valving stays firmer. All-around welding on the spring seat. Piston seal is provided by an OE Supplier. For International or other US territories, additional charges apply. We will replace any parts supplied by us that in our opinion are proven defective. We are not responsible for items when subjected to abuse (off-road, competitions), commercial use, improper installation, accident, or normal wear. Must contact Axlestore for return authorization number. When to replace worn shocks or struts? There are four main reasons that determine when to replace them: 1 To upgrade performance; 2 to restore the vehicle’s designed performance (usually after 50,000 miles); 3 when the vehicle has excessive ride control conditions i. Nose dive, body roll, etc. ; or 4 when the vehicle has a failed unit i. Dripping hydraulic fluid, tire cupping, excessive bounce, etc. Testing has shown that original equipment gas-charged shocks and struts degrade measurably by 50,000 miles. Unlike a tire, which rotates a specific number of times per mile, a shock absorber or strut may compress and extend several times per mile on a smooth road, or several hundred times per mile on a very rough road. There are other factors that affect the life of a shock or strut, such as, regional weather conditions, amount and type of road contaminates, driving habits, loading of the vehicle, tire / wheel modifications, and the general mechanical condition of the suspension and tires. Why to replace worn shocks or struts? Performance degrades slowly over time. When shocks and struts aren’t controlling tire and body movement very well due to wear, all ride control conditions are affected. Stopping ability will be reduced. Tire performance is reduced and because of excessive movement, all other attached steering & suspension components are affected. We carry a wide range of shocks and struts. Every shocks and struts we carry is TS16949 certified. They are made to meet or exceed OEM quality. If you couldn’t find the item you need, please send us a message. Thank you for your business and we are happy to serve you as our valued customer! We strive to provide excellent customer service and satisfaction with our products. We look forward to the opportunity of resolving your concerns!
Full Set 4 Coil-Over Shocks John Deere Gator XUV835E 835M 835R 865E 865M 865R

Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020

Full-CV-Axle-Set-for-John-Deere-Gator-RSX-850-RSX-860-2013-2020-01-wfc
Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020
Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020
Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020
Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020
Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020
Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020

Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020
This is a full set of new CV axles for a John Deere Gator RSX. AMERICA’S CONNECTION FOR ATV PARTS. They will fit the following 4×4 models. Axles made as an OE replacement, and not intended for lifted/ modified vehicles. Stronger than OEM, 4340 chromoly steel axle bars. Greased with a moly based grease to provide superior joint lubrication. Fitted with neoprene CV boots for added wear and puncture resistance. Inboard CV joint spline count: Fronts – 22, Rears – 28. Outboard CV joint spline count: Fronts – 24, Rears – 24. Compressed overall axle length (mm): FL – 648, FR – 648, RL – 576, RR – 674. Replaces OEM # (fronts) AM140129, AM145326, AM145189, AM148393. Replaces OEM # (rears) AM140785, AM145320, AM140786, AM145321. We are experts in the field of ATV & UTV drive line products. Unlike others, we have the expertise to insure that our buyers get the correct parts and help with installation or troubleshooting. ATV Parts Connection, LLC 10555 Guilford Rd #113 Jessup, MD 20794 American owned and operated for over 20 years.
Full CV Axle Set for John Deere Gator RSX 850 & RSX 860, 2013-2020

FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New

FULL-CAB-Clear-LEXAN-Windshield-John-Deere-GATOR-XUV-825-S4-855-S4-UTV-New-01-mcnu
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New

FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New
NOTE: Your UTV must have a ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have any framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. (Soft TOP / Soft REAR / Soft DOORS). (Premium / Level 2). XUV / Full Size / 4 Seats. 825i 825m 855d 855m. 4 Person / UTV. John Deere Gator XUV 825i S4 + 825m S4. John Deere Gator XUV 855d S4 + 855m S4. Soft Cab System: STANDARD. There is a zipper across both doors on each side which will allow you to fully remove each side panel easily. Each panel consists of both the front seat door and rear seat door. Strapping underneath the Soft TOP for support. 2 Soft REAR Panel w/ vinyl window. 3 both Soft DOORS w/ vinyl windows. 4 Clear Lexan Windshield with Quick Connect Clamps (Split Style w/ Dual Vents). Doors can be rolled back and secured open with the included straps/tabs for those warmer days. Our Lexan Windshield is a 2 pc or split style. Dual Vents are standard in our Lexan Windshields. They open/close by sliding. Vents can be omitted if you wish at no charge. NOTE: This soft enclosure is designed to work with XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Photo 1-7: Shows a Full Enclosures on a John Deere Gator plus the Lexan Windshield that is added to this listing. Photo 2: Shows LEXAN WINDSHIELD with Quick Connect Clamps that you will be receiving with this package with standard dual vents. NOTE: Poly top shown in photo is NOT Included. Shows Rear Panel with UTV bed tipped up so you can see full length of rear panel. Photo 7: Shows strapping underneath the soft top for support. Close up view of Quick Connect Clamps used to attached lexan to roll bars. Photo’s 9-11: Show our high quality of materials and workmanship. Photo’s 12: Show standard colors available. Woodland no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. The Full Cab Enclosure with a Lexan Windshield will fit all JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. The WINDSHIELD is 1/4 Lexan so it will not bow at high speed and door & back windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. PREMIUM – Level 2 Lexan Windshield (Mid-Range). Quick Connect Clamps for easy on and off of windshield. Uses 2 pc powder coated steel clamps on frame plus one tightening knob. Clamps and know stay on UTV when windshield is off. Lexan (Can run both pieces for full coverage, for air flow just run bottom or top). Dual vents (open/close by sliding). Heavy Duty Automotive Edge trim at hood line & sides of flexible PVC. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Quick Connect Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan is no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Quick Connect Clamps are removable. We only recommend installing windshield wipers to our Level 3 MR-10 lexan windshield (our Deluxe / Level 3 lexan windshield). This enclosure is BRAND NEW. Made to order for you! It will fit all model years shown above and below. Standard Colors: Black or Mossy Oak Break-Up. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl door windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. View listing # 262100898862. Allows vinyl windows to open. Option 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal and installation. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Doors Unzip & Roll back to be secured safely with Velcro. Velcro rated from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. NOTE: The enclosure itself is made for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. Be sure to view our other enclosure styles….. We have enclosures for most. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). Oversized package size applied. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing ABOVE States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Windshield: Yes – 9034 Lexan / CLEAR Split VENTED
  • Mfg. Warranty: One Year
  • Make & Model: XUV 825i 825m 855d 855m
  • TOP: Yes, included.
  • DOORS: Yes, included.
  • REAR Window Panel: Yes, included.
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
  • Manufacturer Part Number: USA-FCF+LB2 JDGXS4
  • Part Type: Cover or Enclosure + UTV WIndshield
  • Enclosure Standard COLORS: Black or Mossy Oak BreakUp
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Fits Models:: XUV + HPX (see summary for models)
  • Part Name: Full Cab Enclosure with Clear Lexan Windshield
  • Soft Cab System: STANDARD
  • Placement on Vehicle: Left, Right, Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUsa
  • Non-Domestic Product: No
  • Warranty: Yes

FULL CAB + Clear LEXAN Windshield John Deere GATOR XUV 825 S4 + 855 S4 UTV New

FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New

FULL-CAB-Clear-LEXAN-Windshield-JOHN-DEERE-GATOR-4-Seat-550-560-590-UTV-New-01-yjt
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New

FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New
NOTE: Your UTV must have a ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have any framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. (Soft TOP / Soft REAR / Soft DOORS). (Premium / Level 2). XUV / Mid Size / 4 seats. 550 S4, 560 S4 + 590 S4. 4 Person Side by Side UTV. JD Gator XUV 560 S4 + 560e S4. JD Gator XUV 590e S4 + 590m S4 + 590i S4. JD Gator XUV 550 S4. Soft Cab System: STANDARD. 2 Soft REAR Panel w/ vinyl window. 3 both Soft DOORS w/ vinyl windows. 4 Clear Lexan Windshield with Quick Connect Clamps (Split Style w/ Dual Vents). Doors can be unzipped, rolled back, and secured open with the included straps/tabs/snaps for those warmer days. There is a zipper across both doors on each side which will allow you to fully remove each side panel easily. This zipper allows you to removed each panel on each side (this would include both the front seat and rear seat door). Lexan Windshield is a 2 pc or split style and includes dual vents in lower section. Dual Vents in lower section of Lexan Windshields. Vents open/close by sliding. Vents can be omitted if you wish. NOTE: This soft enclosure is designed to work with XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Photo 1-6: Shows different views of a Full Cab Enclosures with Lexan Windshield on a John Deere Gator. Photo 4: Shows the lower section of the Rear Panel with UTV bed tipped up. Photo 5: Shows long zipper across the top of both doors. The entire side panel consisting of both the front and rear seats can be removed. Plus each door can be unzipped, rolled back and be secured open with the tabs/straps included. Photo 7: Shows the vents that are in the lower section of the windshields. They open/close by sliding. Photo 8: Shows close up the Quick Connect Clamps used to attach lexan windshield to roll bars. Photo’s 9-11: Show our high quality of materials and workmanship. Photo’s 12: Show standard colors available. Woodland no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. The Full Cab Enclosure with a Lexan Windshield will fit all JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. The WINDSHIELD is 1/4 Lexan so it will not bow at high speed and door & back windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. PREMIUM – Level 2 Lexan Windshield (Mid-Range). Quick Connect Clamps for easy on and off of windshield. Uses 2 pc powder coated steel clamps on frame plus one tightening knob. Clamps and know stay on UTV when windshield is off. Lexan (Can run both pieces for full coverage, for air flow just run bottom or top). Dual vents (open/close by sliding). Heavy Duty Automotive Edge trim at hood line & sides of flexible PVC. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Quick Connect Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan is no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Quick Connect Clamps are removable. We only recommend installing windshield wipers to our Level 3 MR-10 lexan windshield (our Deluxe / Level 3 lexan windshield). This enclosure is BRAND NEW. Made to order for you! It will fit all model years shown above and below. YEARS: XUV 550 / 560 / 590. NOTE: Will fit model year 2021 only if the lower mfg hard doors are removed when purchasing soft enclosure style with doors. Standard Colors: Black or Mossy Oak Break-Up. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl door windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. View listing # 262100898862. Allows vinyl windows to open. Option 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal and installation. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Doors Unzip & Roll back to be secured safely with Velcro. Velcro rated from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. Be sure to let us know if your ROPS or roll bars have been modified from standard mfg issue so we can review prior to purchasing. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). Oversized package size applied. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If the listing ABOVE states. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Windshield: Yes – 9034 Lexan / CLEAR Split VENTS
  • Mfg. Warranty: One Year
  • Door & Rear Windows: Yes, with Vinyl Windows
  • Make & Model: GATOR XUV 560 S4 + 590 S4
  • TOP: Yes, included.
  • DOORS: Yes, included.
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
  • Manufacturer Part Number: USA-FCE+LB2 JDG554
  • Part Type: Cover or Enclosure + UTV WIndshield
  • REAR Window Panel: Yes, included.
  • Enclosure Standard COLORS: Black or Mossy Oak BreakUp
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Part Name: Full Cab Enclosure with Clear Lexan Windshield
  • Soft Cab System: STANDARD
  • Placement on Vehicle: Left, Right, Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUsa
  • Non-Domestic Product: No
  • Warranty: Yes

FULL CAB + Clear LEXAN Windshield- JOHN DEERE GATOR 4 Seat 550 560 590 UTV New

Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M

Full-Set-4-Coil-over-Shocks-John-Deere-Gator-XUV625i-825i-855D-825M-825E-855M-01-et
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M

Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M
Full Set 4 Coil-Over Shock Absorbers. Front and Rear, Left and Right, Fit John Deere Gator. Why a Complete Quick Replacment Strut? The “Why”: Safety and the ease of installation! These units come pre-loaded with the coil spring (where applicable), boot, bumper kit, spring seat, isolator and strut mount. There are no special tools required and they are vehicle specific as per application for a direct fit ready to install. Brand New Struts/Shocks from a Major Auto Parts Distributor in North America. Made to OE quality standards and performance. High corrosion resistance and long service life. Steel rod is mirco-polished with double chrome plate. Newer Valving technology operates in stages based on the velocity of the car. Use Teflon bonded piston seal to keep friction down and temperature cooler so that valving stays firmer. All-around welding on the spring seat. Piston seal is provided by an OE Supplier. For International or other US territories, additional charges apply. We will replace any parts supplied by us that in our opinion are proven defective. We are not responsible for items when subjected to abuse (off-road, competitions), commercial use, improper installation, accident, or normal wear. Must contact Axlestore for return authorization number. When to replace worn shocks or struts? There are four main reasons that determine when to replace them: 1 To upgrade performance; 2 to restore the vehicle’s designed performance (usually after 50,000 miles); 3 when the vehicle has excessive ride control conditions i. Nose dive, body roll, etc. ; or 4 when the vehicle has a failed unit i. Dripping hydraulic fluid, tire cupping, excessive bounce, etc. Testing has shown that original equipment gas-charged shocks and struts degrade measurably by 50,000 miles. Unlike a tire, which rotates a specific number of times per mile, a shock absorber or strut may compress and extend several times per mile on a smooth road, or several hundred times per mile on a very rough road. There are other factors that affect the life of a shock or strut, such as, regional weather conditions, amount and type of road contaminates, driving habits, loading of the vehicle, tire / wheel modifications, and the general mechanical condition of the suspension and tires. Why to replace worn shocks or struts? Performance degrades slowly over time. When shocks and struts aren’t controlling tire and body movement very well due to wear, all ride control conditions are affected. Stopping ability will be reduced. Tire performance is reduced and because of excessive movement, all other attached steering & suspension components are affected. We carry a wide range of shocks and struts. Every shocks and struts we carry is TS16949 certified. They are made to meet or exceed OEM quality. If you couldn’t find the item you need, please send us a message. Thank you for your business and we are happy to serve you as our valued customer! We strive to provide excellent customer service and satisfaction with our products. We look forward to the opportunity of resolving your concerns! This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Steering & Suspension\Shocks & Coil Overs”. The seller is “axlestore” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Drive Tech Amierica
  • Manufacturer Warranty: 1 Year
  • Manufacturer Part Number: D142426+D142427
  • Bundle Listing: Yes
  • Placement on Vehicle: Front, Left, Rear, Right

Full Set 4 Coil-over Shocks John Deere Gator XUV625i 825i 855D 825M 825E 855M

FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New

FULL-CAB-Enclosure-w-VINYL-Windshield-John-Deere-GATOR-HPX-XUV-2015-2021-New-01-pz
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New

FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Soft TOP + REAR WINDOW + DOORS + VINYL WINDSHIELD =. XUV / HPX /. 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2 Seat Side by Side UTV’s. For older model years, please refer to our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. These model years have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. 2 Soft Rear Panel w/ vinyl window. 3 Both Soft Doors w/ vinyl windows. Do you want to fully enclosure your UTV? If yes, then this package is for you! Proudly Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Soft DOORS can unzip, roll back and be secured in open position with the included velcro tabs/snaps. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). The Full Cab Enclosure with Vinyl will fit the JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. The vinyl windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. This enclosure is Made to order for you! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above (please verify availability for the new models added each year/season before ordering). Standard Colors: Black or Mossy Oak Break-Up. Ustom colors available by special order an addl. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Photo 1-3: Shows Full Cab with Vinyl Windshield enclosure on a John Deere Gator. Photo 4-8: Shows high quality materials and workmanship used on all enclosures. Photo 9-10: Shows standard colors available. Woodland camo is no longer available. Photo 11: Shows the doors unzipped, rolled back, and secured in an open position with the velcro tabs/snaps included. Shown on different make/model UTV for your reference. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. You can see the large industrial sized zippers and the clarity of view through the heavy Vinyl door & back windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. Allows vinyl windows to open. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. Doors Unzip & Roll back to be secured safely with Velcro. Velcro rates from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not include if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. You are responsible to ask any and all questions prior to ordering. Then we will expedite a replacement. Full Cab Enclosures w/ Lexan WS. Full Cab Enclosures w/ Vinyl WS. Summer Cab Enclosures w/ Lexan WS. Mini Cab Enclosures w/ Vinyl WS. Top & Rear Window Only (For your WS). Lexan Windshields w/ Quick Connect Clamps. Door & Rear Window Only (For your Top & WS). Roof TOP / Caps. Soft Full Door Kits. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. Other than the name change, everything else is the same. Correction as of 04/01/2020 to. OUTSIDE CONTINENTAL USA, INTERNATIONAL SALES. Please read the listing to determine if you ordered the correct item. Exception – This does not included if the product sent is defective or the wrong item. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If you listing states. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Fits: XUV HPX (see descrption for model #)
  • Windshield: YES, vinyl windshield
  • Mfg. Warranty: One Year
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Top?: Yes
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
  • Manufacturer Part Number: USA-DE-FCE JDGX15
  • Part Type: UTV Cover or Enclosure
  • Rear Vinyl Window?: Yes
  • Doors w/ Vinyl Windows?: Yes
  • This Enclosure Style Includes:: Top / Rear Window / Doors / Vinyl Windshield)
  • Part Name: Full Cab Enclosure with VINYL WS
  • Colors Available: Black or Mossy Oak BreakUp
  • YEARS: 2015-2021
  • Soft Cab Style: MODULAR
  • Placement on Vehicle: Left, Right, Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2015-2021 New

Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E

Full-Set-4-Coil-Over-Shock-Absorbers-Fit-John-Deere-Gator-HPX-HPX-615E-815E-01-dm
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E

Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E
Full Set of 4 Coil-over Shock Absorbers. Front and Rear, Left and Right. Replaces OEM# AM135375, AM137957. Why a Complete Quick Replacment Strut? The “Why”: Safety and the ease of installation! These units come pre-loaded with the coil spring (where applicable), boot, bumper kit, spring seat, isolator and strut mount. There are no special tools required and they are vehicle specific as per application for a direct fit ready to install. Brand New Struts/Shocks from a Major Auto Parts Distributor in North America. Made to OE quality standards and performance. High corrosion resistance and long service life. Steel rod is mirco-polished with double chrome plate. Newer Valving technology operates in stages based on the velocity of the car. Use Teflon bonded piston seal to keep friction down and temperature cooler so that valving stays firmer. All-around welding on the spring seat. Piston seal is provided by an OE Supplier. For International or other US territories, additional charges apply. We will replace any parts supplied by us that in our opinion are proven defective. We are not responsible for items when subjected to abuse (off-road, competitions), commercial use, improper installation, accident, or normal wear. Must contact Axlestore for return authorization number. When to replace worn shocks or struts? There are four main reasons that determine when to replace them: 1 To upgrade performance; 2 to restore the vehicle’s designed performance (usually after 50,000 miles); 3 when the vehicle has excessive ride control conditions i. Nose dive, body roll, etc. ; or 4 when the vehicle has a failed unit i. Dripping hydraulic fluid, tire cupping, excessive bounce, etc. Testing has shown that original equipment gas-charged shocks and struts degrade measurably by 50,000 miles. Unlike a tire, which rotates a specific number of times per mile, a shock absorber or strut may compress and extend several times per mile on a smooth road, or several hundred times per mile on a very rough road. There are other factors that affect the life of a shock or strut, such as, regional weather conditions, amount and type of road contaminates, driving habits, loading of the vehicle, tire / wheel modifications, and the general mechanical condition of the suspension and tires. Why to replace worn shocks or struts? Performance degrades slowly over time. When shocks and struts aren’t controlling tire and body movement very well due to wear, all ride control conditions are affected. Stopping ability will be reduced. Tire performance is reduced and because of excessive movement, all other attached steering & suspension components are affected. We carry a wide range of shocks and struts. Every shocks and struts we carry is TS16949 certified. They are made to meet or exceed OEM quality. If you couldn’t find the item you need, please send us a message. Thank you for your business and we are happy to serve you as our valued customer! We strive to provide excellent customer service and satisfaction with our products. We look forward to the opportunity of resolving your concerns! This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Steering & Suspension\Shocks & Coil Overs”. The seller is “axlestore” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Drive Tech Amierica
  • Manufacturer Warranty: 1 Year
  • Manufacturer Part Number: D137957+D135375
  • Bundle Listing: Yes
  • Placement on Vehicle: Front, Left, Rear, Right

Full Set 4 Coil-Over Shock Absorbers Fit John Deere Gator HPX, HPX 615E 815E

FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New

FULL-CAB-LEXAN-Windshield-for-John-Deere-GATOR-XUV-835-865-2018-2021-UTV-New-01-pwyq
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New

FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New
NOTE: Your UTV must have a ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have any framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. (Soft TOP / Soft REAR / Soft DOORS). (Premium / Level 2). XUV 835 + XUV 865. 3 Person – Side by Side – UTV. These models have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. 2 Soft REAR Panel w/ vinyl window. 3 both Soft DOORS w/ vinyl windows. 4 Clear Lexan Windshield with Quick Connect Clamps (Split Style w/ Dual Vents). Doors can be unzipped, rolled back and secured open with the included straps/tabs for those warmer days. Our Lexan Windshield is a 2 pc or split style. Dual Vents are standard in our Lexan Windshields. They open/close by sliding. Vents can be omitted if you wish at no charge. NOTE: This soft enclosure is designed to work with XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Photo 1-5: Shows a Full Enclosures on a John Deere Gator. Photo 4: Shows Rear Panel with UTV bed tipped up so you can see full length of rear panel. Photo 5: Shows clear/split/vented Lexan Windshield with Quick Connect Clamps. Vent open/close by sliding. Can be omitted if you wish. Photo 6: Close up view of Quick Connect Clamps used to attached lexan to roll bars. Photo’s 7-10: Show our premium quality of materials and workmanship. Photo’s 12: Show standard colors available. Woodland no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. The Full Cab Enclosure with a Lexan Windshield will fit all JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. The WINDSHIELD is 1/4 Lexan so it will not bow at high speed and door & back windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. PREMIUM – Level 2 Lexan Windshield (Mid-Range). Quick Connect Clamps for easy on and off of windshield. Uses 2 pc powder coated steel clamps on frame plus one tightening knob. Clamps and know stay on UTV when windshield is off. Lexan (Can run both pieces for full coverage, for air flow just run bottom or top). Dual vents (open/close by sliding). Heavy Duty Automotive Edge trim at hood line & sides of flexible PVC. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Quick Connect Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan is no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Quick Connect Clamps are removable. We only recommend installing windshield wipers to our Level 3 MR-10 lexan windshield (our Deluxe / Level 3 lexan windshield). This enclosure is BRAND NEW. Made to order for you! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above. Standard Colors: Black or Mossy Oak Break-Up. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl door windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing : May add 1-2 days to production time. Allows vinyl windows to open. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Option 20: Install 2 grommets to the lower door edge on each side, so you can bungie under your UTV from driver door to passenger door to secure while hauling. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal and installation. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Doors Unzip & Roll back to be secured safely with Velcro. Velcro rated from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Vents can be omitted from lexan windshield if you wish. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. NOTE: The enclosure itself is made for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. Be sure to view our other enclosure styles….. We have enclosures for most. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). Oversized package size applied. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing ABOVE States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Windshield: Yes – 9034 Lexan / CLEAR Split VENTED
  • Mfg. Warranty: One Year
  • Make & Model: XUV 835 + 865
  • TOP: Yes, included.
  • DOORS: Yes, included.
  • REAR Window Panel: Yes, included.
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
  • Manufacturer Part Number: USA-FCF+LB2 JDG835
  • Part Type: Cover or Enclosure + UTV WIndshield
  • Enclosure Standard COLORS: Black or Mossy Oak BreakUp
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Fits Models:: XUV 835 + 865
  • Part Name: Full Cab Enclosure with Clear Lexan Windshield
  • Fits YEARS: 2018-2021
  • Soft Cab System: MODULAR
  • Placement on Vehicle: Left, Right, Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUsa
  • Non-Domestic Product: No
  • Warranty: Yes

FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New

FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New

FULL-CAB-Clear-LEXAN-Windshield-John-Deere-GATOR-HPX-XUV-2015-2021-UTV-New-01-iqe
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New

FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New
NOTE: Your UTV must have a ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have any framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. (Soft TOP / Soft REAR / Soft DOORS). (Premium / Level 2). 625i 825i 855d 825e 825m 855e 855m 815e 615e. 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. For older model years, please refer too our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. 2 Soft REAR Panel w/ vinyl window. 3 both Soft DOORS w/ vinyl windows. 4 Clear Lexan Windshield with Quick Connect Clamps (Split Style w/ Dual Vents). Doors can be rolled back and secured open with the included straps/tabs for those warmer days. Our Lexan Windshield is a 2 pc or split style. Dual Vents are standard in our Lexan Windshields. They open/close by sliding. Vents can be omitted if you wish at no charge. NOTE: This soft enclosure is designed to work with XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Photo 1-5: Shows a Full Enclosures on a John Deere Gator. Photo 6 + 1: Shows LEXAN WINDSHIELD with Quick Connect Clamps that you will be receiving with this package with standard dual vents. Photo 4: Shows Rear Panel with UTV bed tipped up so you can see full length of rear panel. Photo 6 + 1. Shows lower Vents in Lexan Windshield. Can be omitted if you wish. Photo 7: Close up view of Quick Connect Clamps used to attached lexan to roll bars. Photo’s 8-11: Show our high quality of materials and workmanship. Photo’s 12: Show standard colors available. Woodland no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. The Full Cab Enclosure with a Lexan Windshield will fit all JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. The WINDSHIELD is 1/4 Lexan so it will not bow at high speed and door & back windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. PREMIUM – Level 2 Lexan Windshield (Mid-Range). Quick Connect Clamps for easy on and off of windshield. Uses 2 pc powder coated steel clamps on frame plus one tightening knob. Clamps and know stay on UTV when windshield is off. Lexan (Can run both pieces for full coverage, for air flow just run bottom or top). Dual vents (open/close by sliding). Heavy Duty Automotive Edge trim at hood line & sides of flexible PVC. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Quick Connect Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan is no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Quick Connect Clamps are removable. We only recommend installing windshield wipers to our Level 3 MR-10 lexan windshield (our Deluxe / Level 3 lexan windshield). This enclosure is BRAND NEW. Made to order for you! It will fit all model years shown above and below. Standard Colors: Black or Mossy Oak Break-Up. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl door windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. Allows vinyl windows to open. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal and installation. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Doors Unzip & Roll back to be secured safely with Velcro. Velcro rated from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. NOTE: The enclosure itself is made for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. Be sure to view our other enclosure styles….. We have enclosures for most. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). Oversized package size applied. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing ABOVE States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Windshield: Yes – 9034 Lexan / CLEAR Split VENTED
  • Mfg. Warranty: One Year
  • Make & Model: HPX XUV (See script summary)
  • TOP: Yes, included.
  • DOORS: Yes, included.
  • REAR Window Panel: Yes, included.
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
  • Manufacturer Part Number: USA-FCF+LB2 JDGX15
  • Part Type: Cover or Enclosure + UTV WIndshield
  • Enclosure Standard COLORS: Black or Mossy Oak BreakUp
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Fits Models:: XUV + HPX (see summary for models)
  • Part Name: Full Cab Enclosure with Clear Lexan Windshield
  • Fits YEARS: 2015-2021
  • Soft Cab System: MODULAR
  • Placement on Vehicle: Left, Right, Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUsa
  • Non-Domestic Product: No
  • Warranty: Yes

FULL CAB + Clear LEXAN Windshield John Deere GATOR HPX XUV (2015-2021) UTV New