Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Hard LEXAN BACK Panel. Lower ABS Panel +. 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2 Seats Side by Side UTV. For older model years, please refer to our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. These model years have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. Loop CLAMPS (permanent) are used to attach the Back Lexan Panel to the roll bars. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Standard Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan no longer available. VENTED: Open/Close by sliding. Vents can be omitted if you wish. MADE TO ORDER FOR YOU! Busy months are September-February. Individually Hand Tailored for a Precision Fit. Will NOT bow at high speeds! Absolutely Top of the Line Product. Great Shelter from All Weather. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Photo 1-5: Shows Clear Lexan Back with lower ABS Panel on a John Deere Gator. Photo 6: Close up of LOOP Clamps you will be receiving to attach lexan to your ROPS / roll bars. TOP OF THE LINE PRODUCT DESCRIPTION. The HARD Lexan Back Panel is truly the top of the line! They are hand crafted and tailored. For a precision fit. All HARD Lexan Back Panels are made of 1/4 LEXAN and they will NOT bow at high speeds. The Hard Lexan Back Panel uses the best clamping system available. With the Loop Clamps. We line the sides with heavy duty rubber edging or molding to protect the windshield edges & this also prevents any rattle during your ride. It comes with full installation instructions to make the install easy. All our products are backed by a one year mfg. This Hard Lexan Back Panel is Brand New. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit some models and years shown in summary above. Clear Lexan (Tinted no longer available). If you are looking for a quality enclosure for your UTV, look no further. Please check out the pictures. We show you many close up shots that others shy away from. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line Windshield. You won’t be disappointed! Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Panel secured using permanent LOOP CLAMPS. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If listing ABOVE states. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Fits: HPX XUV (See description for model #)
• Windshield: Yes – Lexan – 1 pc + lower abs panel + vents
• Mfg. Warranty: One Year
• Color: CLEAR Lexan 9034
• SATISFACCTION GUARANTEED POLIC: 14 Day Inspection Period (See RETURN Details)
• RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
• Surface Finish: 9034 Lexan – Clear
• Manufacturer Part Number: USA-LBV-C JDGX15
• Part Type: UTV Lexan
• Part Name: Clear Lexan Back Panel w/ Loop clamp
• YEARS: 2015-2021
• Placement on Vehicle: Rear
• Brand: Desert Exchange / PacificEagleUSA
• Warranty: Yes