John Deere Gator 4×2 98 Secondary Driven Clutch 29158

John-Deere-Gator-4x2-98-Secondary-Driven-Clutch-29158-01-kgwp
John Deere Gator 4x2 98 Secondary Driven Clutch 29158
John Deere Gator 4x2 98 Secondary Driven Clutch 29158
John Deere Gator 4x2 98 Secondary Driven Clutch 29158

John Deere Gator 4x2 98 Secondary Driven Clutch 29158
John Deere Gator 4×2 98 Secondary Driven Clutch 29158. Business address must have a loading dock or a fork lift to unload product from the trailer. The business address must be in a business district. After 30 days all sales are considered final. All parts (except those below) have a 30-day guarantee. 90 days (3 months). 180 days (6 months). Bearings, bushings, gaskets, seals, cables, petcocks, clutch plates, sprockets, pistons and rings are all wear items and are not guaranteed by us unless stated specifically that they are good in the listing. Also, all parts are used unless otherwise noted in the listing description. We live by our slogan, Parts Done Right. We believe in honest and fair deals. We stand behind our products. Power Sports Nation offers quality used parts at discount prices. We are a fully licensed and bonded power sports dealer in Nebraska, USA. Our used parts are inspected, cataloged online, and stored indoors within our warehouse. As individuals we are also big enthusiasts of quad sports. We race and we ride! POWER SPORTS NATION 4023717002. 84786 N HWY 81 Norfolk, NE 68701. Message responses may be delayed over the weekend. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “powersportsnation” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
  • Brand: John Deere
  • Warranty: 30 Days
  • Custom Bundle: No
  • Modified Item: No

John Deere Gator 4x2 98 Secondary Driven Clutch 29158

FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New

FULL-CAB-Enclosure-w-VINYL-Windshield-John-Deere-GATOR-HPX-XUV-2010-2014-New-01-ebwc
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New

FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New
NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. TOP + REAR WINDOW + DOORS + VINYL WINDSHIELD =. XUV / HPX /. 620i / 625i / 825i / 850d / 855d / 615e. 2 Seat – UTV’s. HPX / XUV /620i / 625i / 825i / 850d / 855d / 615e. May fit some other model numbers. SOFT CAB SYSTEM: Standard. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. 2 Rear Panel w/ vinyl window. 3 Both Doors w/ vinyl windows. Do you want to fully enclosure your UTV? If yes, then this package is for you! Proudly Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). The Full Cab Enclosure with Vinyl will fit the JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. The vinyl windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. This enclosure is Made to order for you! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all model years shown above and below (please verify availability for the new models added each year/season before ordering). 2010-14; HPX / XUV /620i / 625i / 825i / 850d / 855d / 615e. Standard Colors: Black or Mossy Oak Break-Up. Ustom colors available by special order an addl. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Photo 1-3: Shows Full Cab with Vinyl Windshield enclosure on a John Deere Gator. Photo 4-8: Shows high quality materials and workmanship used on all enclosures. Photo 9-10: Shows standard colors available. Woodland camo is no longer available. Photo 11: Shows the doors unzipped, rolled back, and secured in an open position with the velcro tabs/snaps included. Shown on different make/model UTV for your reference. You can see the large industrial sized zippers and the clarity of view through the heavy Vinyl door & back windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. Allows vinyl windows to open. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. Doors Unzip & Roll back to be secured safely with Velcro. Velcro rates from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not include if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. You are responsible to ask any and all questions prior to ordering. Then we will expedite a replacement. Full Cab Enclosures w/ Lexan WS. Full Cab Enclosures w/ Vinyl WS. Summer Cab Enclosures w/ Lexan WS. Mini Cab Enclosures w/ Vinyl WS. Top & Rear Window Only (For your WS). Lexan Windshields w/ Quick Connect Clamps. Door & Rear Window Only (For your Top & WS). Roof TOP / Caps. Soft Full Door Kits. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. Other than the name change, everything else is the same. Correction as of 04/01/2020 to. OUTSIDE CONTINENTAL USA, INTERNATIONAL SALES. Please read the listing to determine if you ordered the correct item. Exception – This does not included if the product sent is defective or the wrong item. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If you listing states. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Fits: XUV HPX 620i 625i 825i 850d 8855d 615e5e
  • Windshield: YES, vinyl windshield
  • Mfg. Warranty: One Year
  • SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
  • RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
  • Top?: Yes
  • Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
  • Manufacturer Part Number: USA-DE-FCE JDGXUV
  • Part Type: UTV Cover or Enclosure
  • Rear Vinyl Window?: Yes
  • Doors w/ Vinyl Windows?: Yes
  • This Enclosure Style Includes:: Top / Rear Window / Doors / Vinyl Windshield)
  • Part Name: Full Cab Enclosure with VINYL WS
  • Colors Available: Black or Mossy Oak BreakUp
  • YEARS: 2010-2014
  • Soft Cab Style: STANDARD
  • Placement on Vehicle: Left, Right, Front, Rear, Upper
  • Brand: Desert Exchange / PacificEagleUSA
  • Warranty: Yes

FULL CAB Enclosure w VINYL Windshield John Deere GATOR HPX XUV 2010-2014 New