FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New

March 10, 2023
admin

FULL CAB + LEXAN Windshield for John Deere GATOR XUV 835 865(2018-2021)UTV New

NOTE: Your UTV must have a ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have any framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. (Soft TOP / Soft REAR / Soft DOORS). (Premium / Level 2). XUV 835 + XUV 865. 3 Person – Side by Side – UTV. These models have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. 2 Soft REAR Panel w/ vinyl window. 3 both Soft DOORS w/ vinyl windows. 4 Clear Lexan Windshield with Quick Connect Clamps (Split Style w/ Dual Vents). Doors can be unzipped, rolled back and secured open with the included straps/tabs for those warmer days. Our Lexan Windshield is a 2 pc or split style. Dual Vents are standard in our Lexan Windshields. They open/close by sliding. Vents can be omitted if you wish at no charge. NOTE: This soft enclosure is designed to work with XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland Camo color is no longer available). Busy months are September-February. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Photo 1-5: Shows a Full Enclosures on a John Deere Gator. Photo 4: Shows Rear Panel with UTV bed tipped up so you can see full length of rear panel. Photo 5: Shows clear/split/vented Lexan Windshield with Quick Connect Clamps. Vent open/close by sliding. Can be omitted if you wish. Photo 6: Close up view of Quick Connect Clamps used to attached lexan to roll bars. Photo’s 7-10: Show our premium quality of materials and workmanship. Photo’s 12: Show standard colors available. Woodland no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. The Full Cab Enclosure with a Lexan Windshield will fit all JOHN DEERE “GATOR”. The enclosure is available in solid colors of Heavy Duty top gun marine canvas or in Camo patterns made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, and UV resistant. Black and Beige are in-stock colors but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. The WINDSHIELD is 1/4 Lexan so it will not bow at high speed and door & back windows are made of 30 gauge Aqua-View smoked vinyl allowing for an uninhibited view and total clarity. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the full cab enclosure is hand measured and manufactured in the USA for superior fit and quality. The product kit includes the adhesive Velcro as well as installation and care instructions. PREMIUM – Level 2 Lexan Windshield (Mid-Range). Quick Connect Clamps for easy on and off of windshield. Uses 2 pc powder coated steel clamps on frame plus one tightening knob. Clamps and know stay on UTV when windshield is off. Lexan (Can run both pieces for full coverage, for air flow just run bottom or top). Dual vents (open/close by sliding). Heavy Duty Automotive Edge trim at hood line & sides of flexible PVC. Bottom edge padded to seal any gap. Thickness; 1/4 (Won’t bow when hauling or driving at high speeds). The lexan may have bends to better fit the UTV design and/or add strength. Please refer to photo. Detailed installation instructions and hardware is provided with this package. 250 Times the Impact Strength of Glass. Excellent Sound Abatement Properties. Quick Connect Clamps to affix Lexan to frame. Maintenance / Cleaning: Always hose off any excess dirt/mud before cleaning. Very gently wash with a solution of mild soap (like Dawn dish soap) and lukewarm water. Do not apply hard pressure. Only use a soft, dirt free cloth or sponge. This Lexan 9034 does not have a Margard Coating like the MR-10. There are some who make polish specific for Lexan. Tinted lexan is no longer available. If you prefer not to have vents, let us know after the order is placed and we can amend your order. Quick Connect Clamps are removable. We only recommend installing windshield wipers to our Level 3 MR-10 lexan windshield (our Deluxe / Level 3 lexan windshield). This enclosure is BRAND NEW. Made to order for you! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above. Standard Colors: Black or Mossy Oak Break-Up. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl door windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The doors roll back and strap to the rear for that open air feel. You won’t have to remove doors & store them away under your seat. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing : May add 1-2 days to production time. Allows vinyl windows to open. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Option 20: Install 2 grommets to the lower door edge on each side, so you can bungie under your UTV from driver door to passenger door to secure while hauling. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large, Easy-To-Use YKK Zippers on Doors for unmatched Crosswise Strength in the Industry. All YKK Zippers work in extreme temperatures down to 50 degrees below zero. 30 gauge Aqua View Vinyl Windows- rear & doors. All Lexan Windshields use Quick Connect Clamps for easy removal and installation. We have hauled our Lexan Windshield on UTV’s going 60 miles per hour with ZERO bowing! Doors Unzip & Roll back to be secured safely with Velcro. Velcro rated from 0 to 120 degrees F. Easy To Install; Includes Self-Adhesive Velcro plus Installation & Care Instructions. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Vents can be omitted from lexan windshield if you wish. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. NOTE: The enclosure itself is made for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. Be sure to view our other enclosure styles….. We have enclosures for most. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). Oversized package size applied. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If Listing ABOVE States. EXCLUDES: AK, HI, PR. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Option 20 Install Grommets in lower edge of both Doors, to secure enclosure while hauling (bungie under UTV from driver side to passenger side). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.

Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: No
Windshield: Yes – 9034 Lexan / CLEAR Split VENTED
Mfg. Warranty: One Year
Make & Model: XUV 835 + 865
TOP: Yes, included.
DOORS: Yes, included.
REAR Window Panel: Yes, included.
Surface Finish: Enclosure-Solids(Marine Canvas), Camos(Corduva)
Manufacturer Part Number: USA-FCF+LB2 JDG835
Part Type: Cover or Enclosure + UTV WIndshield
Enclosure Standard COLORS: Black or Mossy Oak BreakUp
SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
Fits Models:: XUV 835 + 865
Part Name: Full Cab Enclosure with Clear Lexan Windshield
Fits YEARS: 2018-2021
Soft Cab System: MODULAR
Placement on Vehicle: Left, Right, Front, Rear, Upper
Brand: Desert Exchange / PacificEagleUsa
Non-Domestic Product: No
Warranty: Yes

John Deere Gator XUV 550, 560, 590 Soft Top 2012-2022

March 9, 2023
admin

John Deere Gator XUV 550, 560, 590 Soft Top 2012-2022

This listing is just for the. 2 The default color is Onyx Black. If you want the Mossy Oak camo color, no problem but you will need to message me when ordering. Will fit your Side by Side perfectly, they are designed just for your model. They will work with all hard Windshields. Backs & our Soft Backs. You will need our soft Pacific Eagle Powersports Doors or all Hard Doors to work with Our Soft Tops. Some other brands of Soft Doors & Backs will also work, but please confirm with me first. If you have a. You will need a custom fitment. We have other Cab Combos and Windshields for all J. The Pacific Eagle Powersports 2012+ XUV John Deere Gator. Soft Top offers an economical option for overhead protection during warmer months. The soft top provides protection from sun and rain in an affordable package. Additional features of the top are as follows. Made of heavy-duty marine grade 100% polyester. Water repellent, tear resistant, puncture resistant, UV and mildew resistant. Stabilized fit of less than 1% stretch or shrinkage. Made in the USA. Attaches to frame with heavy-duty Velcro(hook and loop). Comes with everything needed for installation and care. Available in Black and Mossy Oak New Break-Up. [Black is the default color]. Can you really hold a top on with hook and loop (Velcro)? This is not your discount store’s hook and loop. We only use a military grade hook and loop. Will the top interfere with my windshield? The top is designed to fit over the lip at the top of the front frame and should not interfere with your windshield. Can I haul or X 1000er my UTV with the top on? We don’t recommend the top be on when hauling. Simply unstrap the top at each corner and store for hauling. PLEASE NOTE -All features may not be presented in the accompanying pictures. Description takes precedence of pictures. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “mikesmapman” and is located in this country: US. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Surface Finish: 600 Denier Marine Fabric
Manufacturer Part Number: JDG550-TCA
Part Type: Roof
Placement on Vehicle: Upper
Brand: John Deere Gator
Warranty: Full One Year Warranty Against Manufacturing Fault

Secondary Driven Clutch & Drive Belt Kit For John Deere 4×2 6×4 Gator Diesel UTV

March 8, 2023
admin

Secondary Driven Clutch & Drive Belt Kit For John Deere 4x2 6x4 Gator Diesel UTV

For John Deere other parts. V-Belt Drive Belt M158267 for John Deere Gator XUV620i XUV 625i 4X4 Gas Utility. Primary Drive Secondary Driven Clutch for John Deere AMT600 AMT622 AMT626 Gators. Primary Drive Secondary Driven Clutch w/ Belt For John Deere TX Turf 4X2 Gator. Secondary Driven Clutch + Belt For John Deere 4×2 6×4 TH TS TX Turf Gator FJ400D. Secondary Driven Clutch AM140680 AM146219 For John Deere XUV550 S4 4×4 XUV Gator. Primary Drive Clutch Belt For John Deere 4X4 XUV Gator XUV620i, XUV625i Gas UTV. Primary Drive Clutch AM138529 For John Deere XUV 620i XUV625i 4X4 Gator UTV Gas. Complete Primary Drive Clutch & Belt For John Deere 4×2 6×4 TX Turf Gator FJ400D. Secondary Driven Clutch for John Deere 5 Wheel 4×2 Gator AMT600/622/626 AET10637. Mufflers Dual Exhaust Pipes. Front&Rear Brake Rotors Set. Brake Rotors with Pads. Fit For John Deere 4×2 and 6×4 Gator Utility Vehicles. Secondary Driven Clutch replaces OEM number : AM140967 (AM136806, AM128235, AMT2707). Price for 1 pc. Driven Clutch Assembly + Drive Belt. Belt Replaces Part numbers: RE28721. For John Deere Belt. Gator Trail 4X2 Utility Vehicle. Gator Trail 6X4 Utility Vehicle. Gator 4X2 Utility Vehicle. Made of High Quality Material. Easy Installation, direct replacement. We are a CNC factory specialized in high quality aluminum motorcycle parts and accessories, our products cover almost all the bike type, Sport Bikes, Touring Bikes, MX Bikes, ATV & Quad Bikes, Cruiser Bikes, Cafe Racer Bikes, etc. Main products including: brake disc rotors, rearsets, clip ons, wheel sets, footpegs, radiators, forward controls and other aluminum parts. Our store all Parts are not sponsored or endorsed by, or affiliated with the brand, it’s aftermarket product only fit for these brand, it’s fit for Honda, fit for Yamaha, fit for Suzuki, fit for Kawasaki, fit for Harley Davidson, fit for Polaris, fit for KTM, fit for Duke, fit for Ducati, fit for Triumph, fit for BMW. We accept 60 days return request. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “motoradiator” and is located in this country: US. This item can be shipped to United States, Canada.

Number in Pack: 2
Manufacturer Warranty: 1 Year
MPN: ZH-ATV-000041
Compatible Model: 4X2, 6X4 Gators, Diesel Gator, Trail Gator
Voltage: 12 V
Bundle Description: AM140967 (AM136806，AM128235，AMT2707
Horsepower: /
Power Source: Diesel
Country/Region of Manufacture: China
Material: Steel
Model: 4X2, 6X4 Gators, Diesel Gator, Trail Gator
Compatible Brand: 4X2, 6X4 Gators, Diesel Gator, For John deere, Trail Gator
Brand: Tarazon
Color: Silver
Type: Secondary Driven Clutch Belt

NEW Starter for John Deere GATOR TRAIL 6X4 DIESEL GATOR TRAIL 6X4 GAS

March 8, 2023
admin

NEW Starter for John Deere GATOR TRAIL 6X4 DIESEL GATOR TRAIL 6X4 GAS

We are tractor experts. Hydraulic & Power Steering. Clutch, Transmission & PTO. Front Axle & Steering. Sheet Metal and Grille. Wheels, Hubs and Components. Seats and other Components. Rear Axle & Differential. NEW Starter for John Deere GATOR TRAIL 6X4 DIESEL GATOR TRAIL 6X4 GAS. Engineered to perform and fit just like the original starter in the tractor. Built for better performance. High-quality magnets or field coils deliver more torque for fast starts. Complete Tractor Starters Complete Tractor keeps you working in the field with engineer-tested electrical components for tractors. We work directly with factories to ensure each component is manufactured to our exacting quality control standards. But because there is no middleman, we can offer these exceptional-quality electrical components at low factory direct prices. With Complete Tractor starters, you’ll get. Superior Quality Every Time – Our aftermarket starters deliver performance that’s equivalent to the original. Direct-Fit OEM Replacement Parts – Complete Tractor aftermarket starters are designed for perfect fitment to replace the ones that originally came in your tractor. Engineer-Tested Excellence – Our starters go through a rigorous testing program to ensure optimal performance. Reasons to choose Complete Tractor for your next starter. Fast engine starts – High quality magnets or field coils deliver more torque for fast and efficient engine starts. Seals out residue – Sealed housings and bearings keep the internal workings cleaner and drier. Premium materials – Copper and silver contacts instead of cheaper aluminum or steel ones. Long-term reliability – Quality brushes and bushings for a long service life and better efficiency. Brand new starter – Never settle for a secondhand refurbished one. Yes, you have a full year to make sure your starter meets your expectations. Voltage : 12V Teeth : 8 teeth KW : 0.9KW Starter Type : PMDD Notes : w/two (2) ear mount. John Deere: AM875014, AM878176, AM878813. Gator Trail HPX 4X4. Unless otherwise specified in the item listing on our website, on the receipt or packing slip, or in the following terms, Complete Tractor will accept qualified and conforming products for replacement for the period of 1 (one) year. Products must be in? Condition and free from damage of any type, including, but not limited to dents, scratches, cracks, abuse, defacement or indication of removed screws/fasteners or seals. Complete Tractor shall not be held liable for packages lost in transit. The customer may use this label to return the item to Complete Tractor free of charge. After the item is received by Complete Tractor for processing, Complete Tractor will send out a replacement unit. If you have a problem, we will take every step to assist you. View more great items! This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Charging & Starting Systems\Electrical Systems”. The seller is “completetractor” and is located in this country: US. This item can be shipped worldwide.

Brand: Complete Tractor
MPN: 1400-0118
Teeth: 8
Voltage: 12

08 John Deere Gator 620i Gas XUV 4×4 Cam Camshaft

March 7, 2023
admin

08 John Deere Gator 620i Gas XUV 4x4 Cam Camshaft

Cycles R Us specializes in NEW, USED and Aftermarket Motorcycle, Dirt Bike and ATV parts and accessories. We have been supplying quality used parts since 1996. Photos of Used parts are generally of the item listed unless there is a quantity more than 1 available. Cycles R Us describes all parts as accurately as possible, but we are human and mistakes do happen. Description: This is a used part that has been cleaned, tested and inspected to ensure quality. We guarantee this part to be good. Cycles R Us reserves the right to terminate any sales offered at our discretion. All items must be paid for within 4 days. Items not paid for in 4 days will be relisted. Request for tracking numbers on auctions that are less than 7 days old will not be replied to. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “cyclesrus-greatparts” and is located in this country: US. This item can be shipped worldwide.

Brand: John Deere
Manufacturer Part Number: 8888

DOT Pair 4X6inch 120W Sealed Beam LED Headlight Headlamp for JOHN DEERE Gator

March 7, 2023
admin

DOT Pair 4X6inch 120W Sealed Beam LED Headlight Headlamp for JOHN DEERE Gator

The LED headlight upgrade. These headlights offers LED low beam and high beam in the same light. Compatible with headlights: H4651 H4652 H4656 H4666 H6545. Can be used as low beam or high beam. Pins on plug may need to be moved on some vehicles. Operating Voltage: 9-32V DC 3. Optional Color :Black 5. Life time: 50000+ hrs. 26000LM for Low beam 30000LM for high beam. Light: 15x 3W High Power LEDS. Beam Pattern: Flood Beam/ Spot Beam. Housing Material: Black Aluminum. Lens Material: High Quality Clear Plastic. 80% energy saving than traditional halogen lamps, 10 times the brightness of halogen lamps under the same power, green and environmental protection, no mercury, lead and other polluting elements, no pollution to the environment, no ultraviolet and infrared radiation, no harm to the human body, no radiation! White light source, easy for human eyes to accept, will not feel tired. Non-destructive installation, high brightness, very concentrated light, fast heat dissipation. Large-area pure copper substrate + customized special ultra-bright imported LED chips. Heat dissipation: high-speed silent directional supercharged cooling and heat dissipation. Energy-saving design, brighter and more energy-saving than ordinary LEDs. The induction is integrated, and the service life is more than 50,000 hours. Easy installation, just connect to the wire directly. It has the characteristics of explosion-proof, shock-proof, high temperature resistance, high pressure resistance, etc. 2 x 15-LED DUAL BEAM HEADLIGHTS. Off-road vehicle/ATV/truck/boat/bus/engineering vehicle/(excavator, logging machine, road roller, bulldozer, crane, mining vehicle) special vehicle (fire truck, police vehicle, emergency vehicle, communication vehicle, military command vehicle) forklift, Trains, tanks and other vehicles to enhance the lighting. The product must be installed by professionals. Please deny the power off before installation. All our products are manufactured under the strictest quality control. FREQUENTLY ASKED QUESTIONS OF LED HEADLIGHTS. Question: Why the headlights not working or high/low beam not working properly? And how to solve it? Please see the 3 pin of the item one is connect to Ground(Negative), and one is to low beam and the other is High beam. If you turn on the low beam on your car, your car socket should provide 12V between Ground and Low Beam, let low beam light up (6 led Light up). If you turn on the High Beam, your car socket should provide 12V between Ground and High Beam, let high beam light up(all led light up). Our item is not difficult, just provide 12V power to it, it will light up. If you have any problem to control the situation of the light, please just change the socket to get a right power to get your target. Noted: The compatibility table is only for reference, please make sure to verify the installation dimension of your vehicle before purchasing. And thanks to know this item doesn’t come with any mounting brackets. We are happy to help if you need any further information. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “safety_light” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

Fitment 1: For 1975-1990 Buick Electra,1982-1987 Buick Regal
Fitment 2: For 1975-1985 Cadillac Eldorado,1975-1985 Cadillac Seville
Fitment 3: For 1982-1992 Chevrolet Camaro,1982-1987 Chevrolet Cavalier
Fitment 4: For 1979-1986 Ford Mustang,1993-1997 Ford Probe
Fitment 5: For 1980-1986 Nissan 720,1982-1984 Nissan Maxima
Fitment 6: For Kenworth T800 T400 T600 W900B W900L Classic 120/13
Working Life: 50,000h
Replaces Headlight type: H4651 H4652 H4656 H4666 H4668 H6545
Measurement: 6.7x 4.33 x3.15 inch
Assembly Type: Sealed
Headlight Style: Projector
Fitment Type: Direct Replacement
Adapter: H4 Plug
Beam: Spot beam(with High/Low beam)
Lighting Technology: LED
Number of Bulbs: 2
Features: Custom Headlights, Factory Headlights, Halo Headlights
Housing Color: Black
Placement on Vehicle: Front, Left, Rear
Light Color: Cold White
Lens Color: Clear
Bulb Shape Code: H4 (9003)
Manufacturer Part Number: 4*6led
Color Temperature: 6000K
Lumens: 30000LM
Brand: CHUSYYRAY
Type: Bulb
Country/Region of Manufacture: China
Manufacturer Warranty: 5 Years
UPC: 573129360817

MINI CAB w Vinyl Windshield JOHN DEERE GATOR RSX850 + RSX860 UTV (2013-2020)

March 6, 2023
admin

MINI CAB w Vinyl Windshield JOHN DEERE GATOR RSX850 + RSX860 UTV (2013-2020)

NOTE: Your UTV must have a mfg ROPS or roll bar system installed on your John Deere Gator for our soft enclosures to work. Older model years prior to ROPS being required must have a CalMarc ROPS installed for our soft enclosure to work. Our enclosure does not have a framework. Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. (Vinyl Windshield, Soft TOP, Soft REAR Panel). RSX 850 + RSX 860. 2 Seats -Side by Side- UTV’s. Soft Cab System: STANDARD. 2 Soft TOP or Cap. 3 Soft REAR PANEL with Vinyl Window. NOTE: This soft enclosure is designed to work with HPX and XUV or other model Gators which come standard with Roll Bars and ROPS. Our soft enclosures does not come with a frame work or roll bars, it assumes you already have Roll Bars or ROPS installed on your UTV. Thus, it will not fit the TX Gator (which does not come standard with Roll Bars or ROPS) unless you have installed a Calmarc roll bar style to your TX model. PROUDLY Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up (National Guard Woodland is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). Our JOHN DEERE GATOR Mini Cab combines the Vinyl WINDSHEILD, the Soft TOP, and the REAR PANEL with a Vinyl WINDOW all into an economical package! The Mini Cab Enclosure uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The windshield and rear window are made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. Uses marine sewing thread made from selected high tenacity, heat resistant, continuous multi-filament polyester yarns. Along with the highest quality materials, all Enclosures are hand measured and handcrafted to ensure a precise fit. The Mini Cab provides shelter from rain, wind, sun, and snow. The Summer Cab comes complete with self-adhesive Velcro, installation and care instructions. Everything is included in the Summer Cab package for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to order for you! This enclosure is Made to Order for You! The availability shown behind the price reflects our raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit all models and years shown above. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Photo 1-6: Shows different view of the Mini Cab on John Deere Gator. Photo 7-10: Shows examples of our high quality materials and workmanship. Photo 11-12: Show our standard colors available. Woodland camo no longer available. SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Even though this package does not include a zipper or lexan windshield, we discuss these features so you can get a feel of our quality of materials and workmanship used on all our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl windows used on the doors / rear window panel & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers used for unmatched Crosswise Strength in the Industry. KK Zippers work in extreme temperatures down to 50 degrees below zero. Zippers NOT included in this package… Refer to other styles if desired. 30 gauge Aqua View Vinyl Windows- rear panel. All Lexan Windshields use Quick Connect Clamps for easy removal & installation. Lexan Windshield NOT included in this package… Doors Unzip & Roll back to be secured safely open with Velcro. Doors NOT included in this package… Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Velcro rated from 0 to 120 degrees F. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR. You are responsible to ask any and all questions prior to ordering. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Please read the listing to determine if you ordered the correct item. Your order confirmation (as well as the listing description) states what is included and excluded. Then we will expedite a replacement. Thank You for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. We can only offer MEDIA. On certain items (books, cd, dvd, ect). Other than the name change, everything else is the same. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If listing states. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.

Country/Region of Manufacture: United States
Fits: Gator RSX 850 + RSX 860
Windshield: Yes – Vinyl
Mfg. Warranty: YES – One Year
Color: Black or Mossy Oak BreakUp
Top Included?: Yes
Doors Included?: NO None
Surface Finish: Enclosure-Solids(Marine Canvas), Camo’s (Corduva)
Manufacturer Part Number: USA-WTR JDG850
Part Type: UTV Cover or Enclosure
Back Panel Included?: Yes
Vinyl Windows: Yes – In back panel
SATISFACTION GUARANTEED POLICY: 14 day Inspection Period (See RETURN Details)
RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
Mini Cab Enclousure includes:: Vinyl Windshield, Soft Top, + Rear Window(No Door)
Part Name: Mini Cab Enclosure w/ Vinyl Windshield
YEARS: 2013-2020
MODELS: RSX 850 + RSX 860
Soft Cab Style: STANDARD
Placement on Vehicle: Front, Rear, Upper
Brand: Desert Exchange / PacificEagleUSA
Warranty: Yes

Drive belt for John Deere Gator TX 401cc/675cc Gator TS 286cc Gator TH 854cc

March 6, 2023
admin

Drive belt for John Deere Gator TX 401cc/675cc Gator TS 286cc Gator TH 854cc

Fuel Gas Cap Helmet Lock. Ignition Switch Lock Key Set. Fuel Gas Tank Cap Cover Keys. Clutch Friction Disc Plate Kit. Pulsar Pulsing sensor Coil. Steering Head Bearing Kit. Fuel Pump Filter Strainer. Fork Seal and Wiper Set. Radiator Fan Thermo Switch. Ignition Key Switch Lock Set. Rear Brake Master Cylinder. Fuel Cut Off Relay. Petcock Fuel Valve Assembly. YOU MAY ALSO LIKE. You may also like. Rear Footrest foot pegs/main step arm for Suzuki DRZ400S DRZ400SM SV650 SV1000. Generator Stator Coil for KTM 125 200 250 300 380 SX Six days SXS MXC EXC EGS. Starter Clutch for KTM XC-F XCF-W EXC-F SX-F 250 350 SIX DAYS 79240026000. Fuel Petcock for Kawasaki EN500 Vulcan 500 LTD ZR750 Zephyr ZR400 ZRX ZRX-II. Air filter element for KTM 85 105 125 200 250 300 400 450 520 SX XC EXC XCW SMR. Stator Cover Gasket for Suzuki VL800 Boulevard C50 VS750 Intruder 600 VS800GL. Stator Cover Gasket for BMW F700GS F800GT F650GS F800R F800ST F800S F800GS. Voltage Rectifier Regulator for Yamaha DT100 DT175 DT50MX QT50 XT500 XT125. Ignition Key Switch Lock Set for Yamaha TTR225 XT225W XT225WE SR125 RZ50. Fuel Pump Filter Strainer For Suzuki GSXR750 GSX1300 GSXR1000 GSR600 DL650. Drive belt for John Deere Gator TX 401cc/675cc Gator TS 286cc Gator TH 854cc. Condition: 100% brand new Package Included:1x Drive belt(as the picture show). Before purchasing, please make sure that the item of the picture are the same as you need. Buyers are responsible for these charges. Before confirmation an order please ensure your receiving address, contact number, full name and zip code is correct. We are unable to change this address for your own safety once the order has been placed. Sometimes china post will be a little slowly, hope you could kindly wait for parcel, thanks. Thank you for your understanding. Please inspect your order upon receipt. And pls offer us the clear pictures to confirm the problem, or it will be hard for us to help you. But if problems are caused by us, we are sure to blame for it. Feedback is very important. We will work with you to solve any problems. PaymentShippingReturn policyAbout usContact us. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Transmission & Drivetrain\Final & Primary Drive Parts & Kits\Primary Drive Belts & Chains”. The seller is “motorcycle-partser” and is located in this country: CN. This item can be shipped worldwide.

Brand: Unbranded
Country/Region of Manufacture: China
Custom Bundle: No
Modified Item: No
Non-Domestic Product: No
Warranty: 6 Month

For John Deere 4×4 Gator XUV620I XUV625i AM138089 Secondary Driven Clutch + Belt

March 5, 2023
admin

For John Deere 4x4 Gator XUV620I XUV625i AM138089 Secondary Driven Clutch + Belt

For John Deere other parts. Primary Drive Secondary Driven Clutch for John Deere AMT600 AMT622 AMT626 Gators. Primary Drive Secondary Driven Clutch w/ Belt For John Deere TX Turf 4X2 Gator. Secondary Driven Clutch + Belt For John Deere 4×2 6×4 TH TS TX Turf Gator FJ400D. Secondary Driven Clutch AM140680 AM146219 For John Deere XUV550 S4 4×4 XUV Gator. Primary Drive Clutch Belt For John Deere 4X4 XUV Gator XUV620i, XUV625i Gas UTV. Primary Drive Clutch AM138529 For John Deere XUV 620i XUV625i 4X4 Gator UTV Gas. Complete Primary Drive Clutch & Belt For John Deere 4×2 6×4 TX Turf Gator FJ400D. Drive Belt #M158267 for John Deere Gator XUV620I XUV 625i 4X4 Gas Utility V-Belt. Secondary Driven Clutch for John Deere 5 Wheel 4×2 Gator AMT600/622/626 AET10637. Mufflers Dual Exhaust Pipes. Front&Rear Brake Rotors Set. Brake Rotors with Pads. Condition: 100% brand new, never installed. All the products approved in great performance. Aramid fiber Drive Belt for John Deere Gator Turf. High quality drive belt meets or exceeds OEM specifications. XUV Gator Utility Vehicle 620i (Gas). XUV Gator Utility Vehicle 625i (Gas). Price is for Secondary Driven Clutch+. We are a CNC factory specialized in high quality aluminum motorcycle parts and accessories, our products cover almost all the bike type, Sport Bikes, Touring Bikes, MX Bikes, ATV & Quad Bikes, Cruiser Bikes, Cafe Racer Bikes, etc. Main products including: brake disc rotors, rearsets, clip ons, wheel sets, footpegs, radiators, forward controls and other aluminum parts. Our store all Parts are not sponsored or endorsed by, or affiliated with the brand, it’s aftermarket product only fit for these brand, it’s fit for Honda, fit for Yamaha, fit for Suzuki, fit for Kawasaki, fit for Harley Davidson, fit for Polaris, fit for KTM, fit for Duke, fit for Ducati, fit for Triumph, fit for BMW. We accept 60 days return request. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “motoradiator” and is located in this country: US. This item can be shipped to United States, Canada.

Number in Pack: 1
Manufacturer Warranty: 1 Year
Custom Bundle: No
MPN: ZH-ATV-000049-mr
Compatible Model: UV72 GATOR FD620D 4X4 XUV625i 620I
Item Width: 32mm
Voltage: /
Bundle Description: Secondary Driven Clutch Belt
Horsepower: /
Item Length: 1169mm
Power Source: Gas
Country/Region of Manufacture: China
Material: Aramid Fiber Belt
Model: FD620D 4X4 XUV625i XUV 620i
Compatible Brand: For John Deere XUV
Replaces oem number: AM138089, M158267
Brand: Tarazon
Color: Silver
Type: Secondary Driven Clutch Belt

Soft TOP + Soft BACK Panel John Deere GATOR HPX XUV (2015-2021) UTV New

March 5, 2023
admin

Soft TOP + Soft BACK Panel John Deere GATOR HPX XUV (2015-2021) UTV New

Please be sure to ask any questions prior to ordering (we attempt to describe in detail but if we missed anything or you wish clarification, please feel free & be sure to ask us prior to ordering). There are many details, so please read full listing before ordering. Soft TOP + Soft BACK Panel. 625i / 825i / 855d / 825e / 825m / 855e / 855m / 815e / 615e. 2 Seats / Side by Side UTV. For older model years, please refer to our other listings. DOES NOT fit DELUXE CAB Models. SOFT CAB SYSTEM: Modular. Will not fit the CX or TX model Gator unless your unit has the after market CalMarc frame installed. These model years have a fully Modular soft cab system. Then when winter hits, you can add the doors and a lexan windshield to fully enclose your cab. PROUDLY Hand Made in the USA. COLOR – Choice of 2 Standard Colors. Onyx Black or Mossy Oak Break-Up. (National Guard Woodland color is no longer available). This Enclosure is MADE TO ORDER FOR YOU! Busy months are September-February. EXCLUDES: AK, HI, PR. Absolutely Top of the Line Product. Great Shelter from All Weather (Rain/Snow/Sun/Wind). This Package includes a soft TOP and a soft BACK Panel with a Vinyl Window for your John Deere GATOR HPX XUV UTV for an economical package. The Back Panel has a vinyl window. The enclosure are available in SOLID COLORS of Heavy Duty top gun marine canvas or in CAMO PATTERNS made of heavy duty Cordura nylon. The TOP GUN marine canvas fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. Black IN-STOCK color but additional colors are available upon request. The 1000 denier Cordura nylon Camo patterns have a polyurethane backing for water resistance. This is the same high quality fabric found in the big name backpacks. This rugged fabric is made from Invista’s acclaimed, patented high performance polymer, designed for superior strength and abrasion resistance. Now we have Mossy Oaks Break-Up available which is a 600 Deier 100% Polyester manufactured with a 2 pass Polyurethane Coating for Water Resistance. The enclosure adheres to the cab with heavy duty Velcro hook & loop along with 2 Poly-Pro webbing that is manufactured for industrial use. The Poly-Pro webbing has a tensile strength of 2,000 pounds. As with all enclosures, the Soft BACK Panel Enclosure is hand measured and manufactured in the USA for superior fit and quality. We use marine sewing thread made from selected high tenacity, heat resistant, continuous multifilament polester yarns. The Soft Back Panel provides shelter from rain, wind, sun, and snow. It includes the adhesive Velcro as well as installation and care instructions. Everything is included in this Combo Package kit for easy installation. Our enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These Velcro strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. Most owners elect to leave the enclosures on during the warmer months and if they include doors, they run with them secured in the open position. Some owners remove the enclosure completely and elect to leave the Velcro attached to the UTV for easy attachment the next winter. However, we have a small group who remove the Velcro from the roll bars, frame, and/or body completely when they remove the enclosure during the warmer months. The Velcro can be removed and the surface cleaned with a remover like Goof-Off. For these individuals, we sell a replacement adhesive Velcro kit. This enclosure is BRAND NEW. Made to Order for YOU! This enclosure is Made to Order for You! The availability shown behind the price reflects are raw materials available to make up this enclosure at this time, not the number completed and in-stock. It will fit models and years list above. Standard Colors: Black or. If you are looking for a quality enclosure for your UTV, look no further. TOP OF THE LINE ENCLOSURE. This enclosure isn’t your run of the mill, inexpensively made enclosure from. Pacific Eagle Enclosures are proudly made in the. Using only the highest grade and time proven materials. The material withstands being stretched over a boat for years on end enduring the buffeting wind, blowing rain, and harsh sun. This marine canvas fabric is the Top Gun brand. It is a durable, high count woven polyester that is coated on both sides with a specially formulated polymeric coating that will not harden, crack or peel after outdoor exposure or extreme temperatures. The coating adds UV, Mildew & Water Resistance but can still breath so it will not trap excess moisture. The stitching is a continuous multi-filament polyester yarn. Google it and you will find out just how durable this material is. Its stretch-ability is limited to 1% and this helps it to retain the nice tight fit you would expect from a high quality enclosure. Please check out the pictures. We show you close up shots that others shy away from. Photo 1: Shows the soft TOP on a John Deere GATOR. Photo 2-5: Show the Rear Panel with Vinyl Window on a John Deere GATOR. NOTE: Poly top shown in some photos is not included. Photo 6-10: Shows our premium quality materials and workmanship used in our enclosures. Photo 11: Show our standard enclosure colors available (Sorry, National Guard Woodland Camo no longer available). SPECIAL NOTE: Photo’s may show zippers in the VINYL WINDOWS but our standard listing DO NOT INCLUDE these zippers. If you wish any vinyl window to open using zippers, it can be added. Some features are not used in this package, however, they are still discussed to give you a true feeling of the quality of workmanship and materials used in our enclosures. You can see the large industrial sized zippers and the clarity of view through your Lexan windshield & the heavy Vinyl door windows & more. Take a close look at the windows on others, they can look pretty crinkled. When you initially take the few extra minutes to install the enclosure properly, you will love the tight fit that makes it stand out among others. The Lexan Windshield is made of 1/4″ Lexan which is much stronger than the 3/16″ versions that will bow at high speeds with fast sport UTV’s. We also use quick connect clamps with our Lexan screens. These make installation a BREEZE! After the clamps are on your roll bar, you never have to remove them to take your windshield off. Just loosen the knob bolts to remove the Windshield. You are getting the best of both worlds here. Our Lexan Windshields includes a 2 strip of rubber edging along the bottom and both sides. This edging protects the Windshield from hitting the rollbar when running hard and the rubber edging stops that cold. Even though one person can do it, two people are recommended to take advantage of its ability to fit tight. The long, heavy 2 wide strips of hook & loop fasteners (Velcro) hold the enclosure tight in place. This kit comes with full instructions. A full hand tailored, custom fitting, absolutely top of the line enclosure. You won’t be disappointed. OPTIONS AVAILABLE but NOT INCLUDED in this listing: May add 1-2 days to production time. OPTION 3: Add Zippers to the Rear vinyl window so window opens addl. Just unzip the zippers on each side, roll up the vinyl, and secure in open position with tabs included. Made to Highest Standards Hand Tailored for Precision Fit. Using Top of Line, Heavy Duty Marine Grade Materials. Stay True long lasting colors. Water Resistant / Mildew Resistant / UV Resistant / Tear & Puncture Resistant. Stretch & Shrinkage less than 1%. Large Industrial, Easy-To-Use YKK Zippers for unmatched Crosswise Strength in the Industry & all YKK Zippers work in extreme temperatures down to 50 degrees below zero. (NOTE – Zippers NOT used in this package). 30 gauge Aqua View Vinyl Windows- rear window & doors. All Lexan Windshields use Quick Connect Clamps for easy removal and installation. (NOTE – Windshield NOT used in this package). Doors Unzip & Roll back to be secured safely with Velcro. (NOTE – Doors NOT used in this package). Easy To Install; Includes Self-Adhesive Velcro and Installation & Care Instructions. Feel free to view our different levels of Hard Lexan Windshields and add to any of our individual or combo soft enclosures such as; Soft Top, Soft Doors, Soft Doors & Rear. At any time, the Mfg Design Department reserves the right to make changes to the enclosure style and/or materials from the listing description which improves its design and use. Majority of buyers install the enclosure with ease, however, there are a few buyers who prefer to have their dealer install. Be sure to view our other enclosure styles….. We have enclosures for most. If your UTV is modified from the stock/standard mfg. Please be sure to specify the YEAR, MAKE & MODEL of your unit and your choice of enclosure COLOR (t he Year can be important because the fit can vary from year to year). You are responsible to ask any and all questions prior to ordering. Your order confirmation (as well as the listing description) states what is included and excluded. Exception – T his does not included if the product sent is defective or the wrong item. In this case a photo is required for verification. Please read the listing to determine if you ordered the correct item. Exception – This does not included if the product sent is defective or the wrong item. In this case a photo is required for verification of defect or wrong item. Then we will expedite a replacement. Thank you for Looking! The photographs are of the actual item(s) for sale (not pasted or copied from elsewhere) unless stated in the listing as a Stock Photo. All sales are final. Measurements are approximate & are not considered a misrepresentation! We attempt to check our emails on a regular basis, however, please allow 24 to 48 hours for a reply. We do not watch our e-mails 24 hours / 7 days per week. Any discrepancies from the listing must be reported to us within 24-48 hours of receipt of package. Please inspect goods upon receipt. 1- We will leave Feedback for all Buyers after they receive & inspect the merchandise and leave us feedback. We have implemented this policy to encourage Buyers to leave feedback (sadly, many buyers never get around to leaving feedback). We appreciate your understanding. INTERNATIONAL / FOREIGN BUYERS. 1- We will consider all REASONABLE Offers. 2- For your consideration when submitting an offer to us, we do not consider a discount of 50% or more off the listed price as Reasonable. Other than the name change, everything else is the same. Correction as of 04/01/2020 to. OUTSIDE CONTINENTAL USA, INTERNATIONAL SALES. NOTE: The enclosure itself is made specifically for your year/make/model of UTV. Due to the fact that the ROPS and/or accessories on the UTV can vary, such as hard windshield and/or poly top, there is no one fit all situation regarding the attachment points of the windshield and/or poly top to the ROPS. Thus, the webbing of our soft enclosure will need to be cut to go around any of these attachment points. This is an easy process to perform and in the instructions. Feel free to request a copy of the instructions. This applies mostly to styles that works with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. If listing states. What 2 states are not part of the continental US? There are no longer exemptions for lower valued items. Due to a rise in raw materials, effective November 07, 2021 there will be a price increase. Mfg facility has held off doing this for over a year. Those listings not updated by 11/07/2021, maybe pulled and not be viewable for a few days until the prices can be updated. DELIVERIES For CHRISTMAS 2021. Best wishes for a happy and safe holiday season! NOTE: This applies more to SOFT DOORS, the DOOR & REAR combo, and BACK PANEL enclosure styles. Enclosures are attached to the roll bars, frame members, and/or body at various points using Velcro with self adhesive backing (placement will be different for each make/model). These pre-cut Adhesive Hook & Loop strips are applied to the various attachment points (roll bar, frame, and/or body) and will remain there if you decide to remove the enclosure during the warmer months. NOTE: This applies mostly to styles that work with an existing hard windshield, poly top, or hard back panel such as Soft DOOR Kit, Soft Doors + Rear Panel combo, or Soft Back Panel styles of enclosures. The enclosure itself is made for your year/make/model of UTV. This is an easy process to perform. Install enclosure first and be sure you are satisfied with the fit. Once satisified, cut to go around the brackets and seal the raw edge with a match or lighter to seal (have a damp rag handy just in case). Respect, Kindness and Polite Language is Required. If you bully, if you are rude or use Vulgar Language you will be blocked. We shouldn’t have to post this on our listings. Buyers are required to assist in locating lost package. Check all doors, garage and other buildings on your property to see if driver left package in a different location. Check with other household members to see if they received package and set aside without telling you. Check with your closest neighbors to see if delivered to them in error. DELIVERIES For CHRISTMAS 2022. INDUSTRIAL ZIPPER MAINTENANCE: (Applies to Soft Marine Canvas enclosures only). If you reside in cold weather areas or extremely dirty areas, you will need the following for good performance of your zippers. All other areas, a good rinsing off with a water hose is advised after riding to remove dirt and keep zipper clean. #1 – YKK Zippy Cool Cleaning Fluid & Lubricating Stick, The Complete Zipper Care System (amazon. Com, walmart. Com). #2 – If caught without your Zippy Cool Stick, a Good old fashioned PARAFFIN WAX can be used. This item is in the category “eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Other ATV, Side-by-Side & UTV Parts & Accessories”. The seller is “usa_made_utv_enclosures” and is located in this country: US. This item can be shipped to United States, Canada.

Country/Region of Manufacture: United States
Fits: HPX XUV (see description for models)
Windshield: NO WS – You already have a WS
Mfg. Warranty: YES – One Year
Doors Included?: NO
TOP / Cap Included?: YES
Back Panel w Vinyl Window: YES
Surface Finish: Enclosure-Solids(Marine Canvas), Camo’s (Corduva)
Manufacturer Part Number: USA-DE-TCA+BCK JDGX15
Part Type: UTV Cover or Enclosure
SATISFACTION GUARANTEED POLICY: 14 Day Inspection Period (See RETURN Details)
RETURN POLICY: 30 Days / RMA # Required (See RETURN Details)
Standard Colors: Black or Mossy Oak BreakUp
Part Name: Soft TOP + BACK w/ Vinyl Window
YEARS fit Mid 400: 2015-2021
Soft Cab System:: MODULAR
Placement on Vehicle: Rear, Upper
Brand: Desert Exchange / PacificEagleUSA
Warranty: Yes

M	T	W	T	F	S	S
« Feb				Apr »
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31